Auto

May 16 2018

Drawing a circle in AutoCAD, auto circle.#Auto #circle

Drawing a circle in AutoCAD

Drawing a circle in AutoCAD is one of the most fundamentals while learning how to use the software.

In AutoCAD there are many ways to draw circles, and all these ways depend on your inputs and the feature you want your future circle to have. The simplest procedure by default is to indicate the center point of your circle and the its radius.

1- Center point and Radius (Using the command windows)

To draw a circle in AutoCAD, you can:

Remember to hit the ENTER key to validate each stage.

What just happened is; you’ve drawn a circle of radius 50 and the center of your circle is right at the point of coordinate (600,600).

2- Center point and Radius

Now you can use this same method to draw a circle but this time not using the command windows.

Auto circle

  1. Click on the circle icon
  2. Click on the drawing window to specify the center of your circle
  3. Give a value representing the radius of your circle and hit ENTER (or simply click somewhere on the drawing area as you see what your circle will be when you move your mouse without clicking)

3- Center point and Diameter

If you noticed while using the 2 methods above, on the second stage, where you did specify the radius, the command window looked like this

Specify radius of circle or [Diameter] 50.0000 :

In this step, if you had entered D , you would have seen this

Specify diameter of circle 12.0000 :

AutoCAD would be asking your the value of the diameter instead of the value of the radius. It is true that the diameter of a circle is twice its radius, but if you feel more comfortable indicating the diameter, AutoCAD gives you this alternative.

4- Drawing a circle in an isometric view

Its is sometime a headache to draw a circle in an isometric view and to see the circle having the expected position. To help draw a circle in an isometric view it is always good to have a 3D face helping you to harmonize the position of your circle with.

Having a 3D object drawn help you.

Make sure the Dynamic UCS is allowed to be able to use this method.

Auto circle

It will help you easily get circle on a face you like.

Auto circle

I used those diagonals to help me find the center of the circle (this technique is very helpful as you can observe in these AutoCAD 3D tutorial), and when allowing the Dynamic UCS I can easily orientate my circle planar to each face. You can use this technique to draw circle in isometric view.

U can as well use the UCS command to rotate the UCS if you have to 3D face to use as a reference.

U can rotate the x, y, or z axis as needed.

Here is a post where I worked on rotating the UCS using the UCS command in AutoCAD.

5- Drawing a circle

Auto circle

Each one of these icons can help you draw circle in a totally different way compared to all methods seen above. You can draw a circle specifying:

Two endpoints of the diameter

Auto circle

3 points of the circle circumference

Auto circle

A circle with a specific radius and tangent to two objects (this has been extensively used in this AutoCAD exercise in case you would like to see what this can help you do)

Auto circle

Circle tangent to 3 objects

Auto circle

Go ahead an do these AutoCAD exercises as self assessment.

Auto circle





Written by admin


Leave a Reply

Your email address will not be published. Required fields are marked *